1198
BPI-M4 Zero Introduction
Banana Pi BPI-M4 Zero is the successor model of M2 Zero. It has a huge improvement in performance. The SOC is upgraded to H618 and the CPU frequency is increased by 25%. The memory is upgraded to DDR4, the capacity is eightfold, and 32G eMMC is added. It supports 5G WiFi, and the USB interface has also been upgraded to type-C.
Key Features
- Allwinner H618, Quad-core ARM Cortex?-A53 processor
- ARM Mali G31 GPU
- 2.4G/5G WIFI & Bluetooth 5.0(K019 module is wifi5, K016 module is wifi4)
- 4G LPDDR4 RAM
- 32G eMMC flash memory
- 1x USB2.0 Type-C OTG, 5V power supply
- 1x USB2.0 Type-C
- 1x miniHDMI 2.0a
- 1x 24-pin FPC connector
- 1x USB2.0 (in FPC connector)
- 1x 100Mbps Ethernet (in FPC connector)
Hardware Spec
| Hardware Specification of Banana pi BPI-M4 Zero | |
|---|---|
|
CPU |
Allwinner H618, Quad-core ARM Cortex?-A53 processor, 64-bit, up to 1.5GHz |
|
GPU |
ARM Mali G31 GPU |
|
Memory |
4 GB LPDDR4 |
|
Storage |
32G eMMC flash |
|
SD card |
MicroSD card slot, SDIO3.0 |
|
Wireless |
2.4G/5G WiFi and Bluetooth 5.0 |
|
HDMI |
1x miniHDMI 2.0a (up to 4K@60Hz with HDR10, CEC, DDC, SCDC), HDMI digital Audio output |
|
USB |
1x USB2.0 Type-C HOST, 1x USB2.0 Type-C OTG |
|
40-pin header |
28 pins GPIO and Power (+5V, +3.3V and GND) |
|
24-pin FPC |
0.5mm pitch FPC connector， 1x USB2.0, 1x IR, 1x 100Mbps Ethernet |
|
9 pins GPIO, UART,TWI/I2C, PWM, PCM/I2S |
|
|
Buttons |
Reset, FEL |
|
LED |
Power Status and Activity status |
|
Power |
5V@3A via USB Type-C |
|
Size |
65mm × 30mm |
|
Weight |
|
